Service - the light horn

Technology in the service of health

Studies on professional musicians confirm again and again that they suffer particularly often from diseases of the musculoskeletal system. The spine, neck, shoulder area and wrists of the blower are at risk of wear and tear. Horn player arms even carry twice the weight: on the double horn, on the triple horn!

Light valves

Bei FINKE wurde das „leichte Horn“ zum Entwicklungsziel Nr. 1. Einen Ansatzpunkt boten die Messingventile, die Stölzel im Jahr 1815 zur Reife gebracht hatte. Erst 150 Jahre danach versuchten die Instrumentenbauer, das schwere Metall durch leichtere Werkstoffe zu ersetzen. Mit ersten Entwicklungen tat man sich schwer, zu oft saßen die neuen „Mantel-Ventile“ fest: Wärmedehnung war das Problem. 

While most manufacturers have lost their interest in plastic valves, FINKE brought the Bielefeld University of Applied Sciences into the company. A time of thorough research, some self-doubts and large investments finally brought them to life: the everyday suitable valves made of all-plastic with stainless steel axis. They could either only be made to measure or not at all. That is why they are also interchangeable with one another.

But the skepticism of many musicians remained. They remembered the setbacks of the pioneering days and they still suspected cheap plastic material where in reality high-performance materials are used. These polymers can easily compete with the best metal alloys because they are incredibly wear-resistant and resilient. The FINKE horns have long since earned the trust they and their plastic valves deserve. Distributed in hundreds of copies all over the world, they can be blown under all climatic conditions without any problems.

At a glance

  • Plastic valves do not oxidize, which is why conventional valves wear out.
  • Maintenance is limited to cleaning - the blower can do that himself.
  • The slight inertia of the mass becomes noticeable at the touch of a button - relief for the wrist.

Slim tubes

FINKE machte nicht nur die Ventile „schlank“. Dünnwandige Bögen und Rohre brachten eine Gewichtsreduzierung von 30%. Solidität und Ansprache blieben davon unberührt, verschlechterten sich nicht einmal ansatzweise. Zuletzt wurden die Kleinteile einer Abmagerungskur unterzogen. So entstand unter anderem ein Ventildeckel aus poliertem Aluminium. Der übliche Messingdeckel wiegt mindestens das Dreifache. Das Ergebnis: FINKE-Hörner gehören zu den Leichtesten auf dem Markt!

The sound makes the music

The acoustics of the instruments were worked on with the same thoroughness. The horns that have become lighter should also be easier to blow. FINKE was one of the first manufacturers to seek advice from Braunschweig. In years of collaboration with Dr. Klaus Wogram from the Acoustical Institute of the Physikalisch-Technische Bundesanstalt managed to improve the mood and response of the FINKE horn well above the average! This is especially true for the high location. Light in weight, easy to respond, clean in tone: This is how FINKE horns became sound horns. FINKE will continue to strive to make good things even better in the future. More and more wind players are discovering that they have a clear advantage!

Patented instrument technology

FINKE has a number of patent applications for horn construction. Of course, these patents also improved the other brass instruments.